Trapdoor covers snap, floppy buttons vanish, and the drive your A1200 needs was never made to fit it. This collection is the printable answers — each one compared against the other versions of the same part, checked against the designer’s own page, and linked straight to them.
Every entry states the exact machine it fits — an A1200 trapdoor is not an A500 trapdoor, and we say so when a designer confirms a part does not fit. Licenses are shown as the designer published them, and the files always stay on the designer’s page.
Amiga 1200 Back Trapdoor — HDMI, MicroSD and USB
The back trapdoor that finishes a PiStorm32 build: HDMI, USB and microSD on the rear panel, with the support designed in.
Commodore Stand for Amiga 500, 600 and 1200 — With Logo
One stand for the whole wedge family — A500, A600, A1200 and the 8-bit wedges too — with the Commodore logo in the print.
Amiga 1200 Motherboard Shim — Fit an A1200 Board in a PC Case
Rehousing an A1200 board in a modern PC case? This shim matches its three screw holes to ITX/ATX mounting. Designer-confirmed: not for the A500.
2.5-Inch HDD Adaptor for Amiga 1200 Drive Swaps
Newer 2.5-inch drives are thicker, with holes in the wrong places. This bracket fixes both — the designer used it in an A1200.
Amiga 1200 Ventilated Latched Trapdoor Cover
The designer printed the other trapdoor covers and watched their catches break — so this one latches with a twist knob instead of a snap. Rated 5/5 on Printables.
Gotek FlashFloppy OLED & Rotary Mount
A mounting case that gives a FlashFloppy Gotek its OLED screen and rotary dial a proper home on the machine, instead of dangling out of the floppy slot.
Amiga 500 Gotek USB Bracket v2 — FlashFloppy OLED
The default A500 Gotek bracket since 2018: a proper drive-bay home for the emulator, with a window for a FlashFloppy OLED so you can read the disk image name before you commit.
Amiga 3000 Gotek V2 Base
Puts the Gotek V2 exactly where Commodore put the floppy — behind the original A3000 bezel, at the original height, on the machine’s own mounting points.
Amiga 4000 HD Floppy Bracket with Passthrough
One rigid bracket that stacks an HD floppy and a Gotek SFDISK in the A4000D and passes the SD card through to the front — no supports, Fusion 360 source included.
Gotek and CF-IDE in One 3.5″ Bay — Amiga 2000 / 4000
A Gotek and a CF-IDE adapter in a single 3.5″ front panel for the A2000/A4000 — OLED, rotary encoder and buzzer behind one bezel.
Amiga 1200 Raspberry Pi Case Brackets — Non-Destructive
Mounts a Raspberry Pi inside an A1200 case on the case’s own fixings — no cutting, no glue, fully reversible. For Pi conversions of a spare case, not an original motherboard.
Amiga 1200 Riser Feet — Room for Accelerator Cooling
Lifts the A1200 just enough to give a Blizzard PPC’s heatsink air, while keeping the case low enough that the keyboard still clears the card.
RGBtoHDMI Housing for Amiga 500
A proper case for the A500’s RGBtoHDMI board: mounts the Denise-socket PCB and the Pi Zero, and brings Mini-HDMI out the back cleanly.
Make Amiga parts?
The collection grows from designers’ submissions as much as from our hunting. Listings are free, credited by name, and removable on request.